Products Page

Your shopping cart is empty.
Visit the shop

LoadingUpdating...
Electrical Accessories
CH000A  (SXS/EX)
CH000A (SXS/EX)

Hi-Model D9.4 x d4.9 x L19.7 mm Ferrite Cores

CH000A  (SXS/EX)More Details
Size: D9.4 x d4.9 x L19.7 mm
Weight: 4 gram ( each )

FEATURES:
Used between the wires of electrical components, eliminate external and internal high frequency interference.

Includes/Requires:
2 x Ferrite Cores

Price: PHP 0.00

CH000B  (RG/OA)
CH000B (RG/OA)

Hi-Model D14 x d8 x L7 mm Ferrite Cores

CH000B  (RG/OA)More Details
Size: D14 x d8 x L7 mm
Weight: 4.5 gram ( each )

FEATURES:
Used between the wires of electrical components, eliminate external and internal high frequency interference.

Includes/Requires:
2 x Ferrite Cores

Price: PHP 0.00

CH000C  (PR/PS)
CH000C (PR/PS)

Hi-Model D16 x d12 x L8 mm Ferrite Cores

CH000C  (PR/PS)More Details
Size: D16 x d12 x L8 mm
Weight: 3.3 gram ( each )

FEATURES:
Used between the wires of electrical components, eliminate external and internal high frequency interference.

Includes/Requires:
2 x Ferrite Cores

Price: PHP 0.00

CH000D  (AP/AX)
CH000D (AP/AX)

Hi-Model D11.5 x d5.5 x L4.4 mm Ferrite Cores

CH000D  (AP/AX)More Details
Size: D11.5 x d5.5 x L4.4 mm
Weight: 2 gram ( each )

FEATURES:
Used between the wires of electrical components, eliminate external and internal high frequency interference.

Includes/Requires:
2 x Ferrite Cores

Price: PHP 0.00

APLSLS  (SRGR/SPAX)
APLSLS (SRGR/SPAX)

Hi-Model Aviation Power Lights Scale
Lighting System

APLSLS  (SRGR/SPAX)More Details
FEATURES:
-Easy to use scale LED lighting set, suitable for 30-60 size scale model helicopters and aeroplanes.
-Two switches, one is for the operation of the lights and one is for the optional landing lights.

SPECIFICATIONS:
Power supply: 4.8V to 9V. (from receiver or separate battery pack)

Includes/Requires:
2 x red beacon
2 x white strobe
1 x red & 1 x green navigation light


Price: PHP 0.00

GTLED1  (REP/RXX)
GTLED1 (REP/RXX)

G.T. POWER R/C Hellicoper/airplane
LED Light System

GTLED1  (REP/RXX)More Details
FEATURES:
Suit for helicopter and airplane.
Easy to install, the lights will change according to the position of your transmitter sticks.
8 color LED lights.
Input 4-6V.

SPECIFICATIONS:
Input voltage: 4V - 6V
Current: 30mA
Main control board size: 35 x 24 x 8mm
Led lead length: 600mm/pc
Weight: 35g

Includes/Requires:
1 x LED system control box (35 x 24 x 8mm)
2 x always-bright white lights
1 x always-bright green light
1 x always-bright red light
2 x white strobe lights
2 x slow-flash red lights
1 x set light fixing harness

Price: PHP 0.00

PX2671  (IIGX/IXXX)
PX2671 (IIGX/IXXX)

PROLUX 12 Power Panel w/ Glow Starter Charger

PX2671  (IIGX/IXXX)More Details
FEATURES:
-Power all equipment from a single 12V DC field battery
-Color-coded banana jacks supplying 12V DC power for electric starters
-Color-coded banana jacks, ON/OFF & reversing switch for 12V electric fuel pumps
-Color-coded banana jacks supplying 1.2V DC for glow plugs, with heat adjustment dial.
-MOSFET power transistors and pulsed current deliver high-power, high-efficiency operation
-Built-in ammeter helps detect fouled glow plugs and power-flooded engines

Price: PHP 0.00

PX2863  (APX/AXX)
PX2863 (APX/AXX)

PROLUX Glow Plug Extension for planes & helis

PX2863  (APX/AXX)More Details
Specifications:
PROLUX Glow Plug Extension for airplanes
From Prolux, made in Taiwan

Includes/Requires:
Includes:
1 x glow plug extension

Price: PHP 0.00

MVK805670  (ORG/OXX)
MVK805670 (ORG/OXX)

MAVRIKK Remote Glow Extension w/ Rubber Boot

Price: PHP 0.00

MVK803477  (RGX/OAX)
MVK803477 (RGX/OAX)

MAVRIKK Remote Glow Adapter w/ Alligator

Price: PHP 0.00

JI00003  (AXG/GAX)
JI00003 (AXG/GAX)

JR Switch Harness C

JI00003  (AXG/GAX)More Details
Small Switch Harness w/Charge Cord

Price: PHP 0.00

JI00004  (REP/RXX)
JI00004 (REP/RXX)

JR Switch Harness G w/ Charging Socket

Price: PHP 0.00

TPDLXS  (GGR/GXX)
TPDLXS (GGR/GXX)

Towerpro Battery Level Displayer

TPDLXS  (GGR/GXX)   More Details
Specifications:
Voltage:4.8V-6V

Price: PHP 0.00

JP00201 (IRX/IAX)
JP00201 (IRX/IAX)

JR Receiver Battery Case BEC

Price: PHP 0.00

KS-1430
KS-1430

K&S Heat Clip Bolt for OS50 Engine

KS-1430More Details
It is replacing one place of the back plate attachment screw of engine, and is a part for certainly fixing the alligator mouth clip for a ground at the time of plug heat.
It is hard coming to separate a clip in the vibration at the time of engine starting, and is very convenient.
Three kinds for OS60/70/91, OS50 and OS32 were prepared.

Price: PHP 0.00

KS-1431
KS-1431

K&S Heat Clip Bolt for OS60 70 90

KS-1431More Details
It is replacing one place of the back plate attachment screw of engine, and is a part for certainly fixing the alligator mouth clip for a ground at the time of plug heat.
It is hard coming to separate a clip in the vibration at the time of engine starting, and is very convenient.
Three kinds for OS60/70/91, OS50 and OS32 were prepared.

Price: PHP 0.00

KS-868.1
KS-868.1

K&S Servo Wire Holder(Clear)

KS-868.1 More Details
Plastic holders for fixing lead wire neatly on your model. Use just by pressing them on M3 socket head bolt.

Price: PHP 0.00

VLTDSP6S
VLTDSP6S

HiModel LED 1-6S Lithum Battery Unit Cell Voltage Checker

VLTDSP6SMore Details
Features:
Specially designed for checking the unit cell voltage of Lithium polymer batteries, directly plug the voltage checker into the balance charging plug of the battery pack, it will display the voltage of each cell in turns from cell 1 to cell 6, and then repeat.

Specifications:


[Dimension] 42x28x 11 mm / 1.65x1.1x0.43 in

[Weight] 7 grams / 0.26 oz

[Operating Voltage] 0V to 4.3V (input voltage higher than 4.3V or wrong polarity may result in damage to the tester)

*The battery checker is designed for checking the approximate voltage range of the Lipo cells, and not suit for accurate voltage measurement.

Price: PHP 0.00

RC3001
RC3001

Input 6-12V/ Output 1.4V On-board Glow Plug

RC3001More Details
Features:
■ 6V ~12V auto-detect
■ Touch button, 15 seconds auto-shut off.
■ Short circuit and over heat protection.
■ Automatically adjust the output currency based on the load.
■ Switch mode energy conversion, efficiency is over 90%.
■ Lightweight, and can be installed directly to the aircrafts.
■ LED indication one-touch button.

Specifications:

Power input: 6V to 12V/ 2-3S Lipo
Output: 1.4V
Max output currency: 6A
Weight: 19.3g / 0.68oz (including wires, connectors)

Typical application: Any model using glow plug engine.

Price: PHP 0.00

SGH5284X
SGH5284X

SG Reactor X 2

SGH5284XMore Details
Features

We’ve added what customers wanted to the popular, proven, and high quality ReactorX regulator.

* Three selectable voltage settings of the CCPM servo bus (regulated 6.0V, regulated 6.4V, NEW unregulated 8.4V)
* Supports over 15 Amps of continuous output for use with any servos on the market.

The preset CCPM voltages are: 6.0V regulated for all standard and digital servos. 6.8V regulated for high voltage type servos and brushless series servos. In addition the new X2 now allows full unregulated Li-Po voltage (8.4V at full charge) to pass directly to the servos for maximum voltage to HV type servos.

Reactor X2 allows pilots to use HV servos on any type of receiver that normally would not allow direct Li-Po power supply. Certain Futaba, JR and other receivers do not permit direct Li-Po input voltage but can now be used with Reactor X2 by passing high voltage directly to the CCPM servos and a safe 5.2V to the receiver.

Dual Power Bus, Dual Regulators

The original Reactor X was the first helicopter voltage regulator system to offer dual regulators with servo power bus connections. The challenge of any power system is to supply current to hard-working servos safely and with the lowest resistance possible. Single battery setups with undersize wires and connectors don’t cut it anymore. Reactor X and the NEW Reactor X2 solves the power supply issue.

CCPM Power Bus - Three heavy current users CCPM / Mech. Mix servos are connected to the dedicated power bus for direct, consistent regulated power straight from the battery pack. A flick of a switch sets this power bus to 6.0V or an ultra powerful 6.8V output or use the included jumper for unregulated 8.4V, Futaba BLS Brushless heli servo series will find the 6.8V setting just as fast as unregulated 7.4V setups, but more consistent feel flight to flight.

Receiver Power Bus - A dedicated noise-free linear regulator provides preset 5.2V power through three redundant leads to your receiver which provides over 5 Amps of current. This voltage is recommended to get the best out of every gyro and tail rotor servo. The steady power supply will eliminate any chance of receiver brown-outs. Signal output from the RX to the CCPM servo bus are carried through the included large gauge connection leads. The receiver is at safe voltage for any 4.8V rated equipment plugged in.

Price: PHP 0.00